Switch The Answering Machine On/Off Using The Base; Switch The Answering Machine On/Off Using The Handset - BT SYNERGY 4500 User Manual

Setting up the answering machine
Switch the answering machine ON/OFF using
the base
1. Press and release
If you hear, "Answer on, your answer and record outgoing
message is....", the answering machine is switched on and
is ready to answer incoming calls and record any
messages. The display on the base shows the number of
messages stored in the memory.
If you hear "Answer off" the answering machine is
switched off. The display on the base will flash between
a dash (-) and the number of messages saved in the
memory.
Switch the answering machine ON/OFF using
the handset
Menu
1. Press or
Menu
current status ( Off
2. If you want to change the status, press either the
ON option button. Your chosen setting will be
announced and then the display will return to standby.
If you experience any problems, please call the Helpline on 0870 605 8047
Synergy 4500 – Issue 3 – Edition 1 – 21.08.06 – 7771
to switch ON or OFF.
until the display shows
or On ) is highlighted.
Symbol
r
t
8-0
If you have selected Answer Only
mode the caller will hear an
advisory announcement only, and
will not be able to leave a
message, see page 43-44.
The only option available is to
Answer . The
toggle the setting, i.e. if the
machine is set to Answer on you
can only change to Answer off and
OFF or
this change of setting only will be
announced.
Answering machine
Definition
(flashing) Message recording
(memo, outgoing
message or
incoming
message).
or 2 to 9 Setting or reading
answer delay.
Counting down.
41