Draining The Hot Water Tank; Servicing The Machine; Removing The Brew Mechanism - Newco FKP-3 Manual

DRAINING THE HOT WATER TANK

THE DRAIN TUBE IS CLIPPED TO THE TANK PLATE IN FRONT OF THE TANK.
THE HOT WATER TANK CAN BE DRAINED FROM THE FRONT OF THE MACHINE –
UNPLUG MACHINE FROM POWER SOURCE. REMOVE POD WASTE TRAY.
CAUTION-UNLESS THE TANK IS LEFT TO COOL THE WATER IS EXTREMELY HOT
AND CAN CUASE HARMFUL BURNS. REPLACE DRAIN PLUG, ENSURE HOSE
CLAMP IS TIGHT AND REPOSITION DRAIN HOSE BEFORE RE-FILLING THE HOT
WATER TANK.
The Fresh Cup machine has a modular Water Tank Assembly and Brew Mechanism.
These assemblies can be easily removed from the machine by removing or loosening
Machine nuts as noted in drawings below:

REMOVING THE BREW MECHANISM

BREW MECHANISM
ACCESS SCREWS
(VIEW FROM BOTTOM OF MACHINE)
REMOVE BRASS
KNURLED NUT (2)
LOOSEN ACORN NUTS

SERVICING THE MACHINE

(2)
NOTE: TO REMOVE BREW
MECHANISM, UNSNAP
WATER & HARNESS
11
FITTINGS