Next steps
1. Replace the
hard drive assembly
2. Replace the
battery
3. Replace the
base cover
4. Replace the
optical drive assembly
5. Replace the
SD memory card
6. Follow the procedure in
Touchpad
Removing the touch pad assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
4. Remove the
base cover
5. Remove the
battery
Steps
1. Open the latch and disconnect the hard drive cable and touch pad cable from the system board [1, 2].
2. Peel the tape that secures the touch pad to the palmrest and keyboard assembly [3].
after working inside your computer
before working inside your computer
Removing and installing components
47