Next steps
1. Replace the
power button board
2. Replace the
display assembly
3. Replace the
SSD
4. Replace the
WLAN
5. Replace the
battery
6. Replace the
base cover
7. Replace the
optical drive assembly
8. Replace the
SD memory card
9. Follow the procedure in
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
4. Remove the
base cover
5. Disconnect the battery cable from the connector on the system board
6. Remove the
memory
7. Remove the
WLAN
8. Remove the
SSD
9. Remove the
hard drive assembly
10. Remove the
system fan
11. Remove the
heatsink
12. Remove the
display assembly
62
Removing and installing components
after working inside your computer
before working inside your computer