Base Cover; Removing The Base Cover - Dell Vostro 3590 Service Manual

Base cover

Removing the base cover

Prerequisites
1. Follow the procedure in
2. Remove the SD memory card
3. Remove the optical drive assembly
Steps
1. Loosen the three captive screws [1].
2. Remove the single (M2x4) screw, two (M2x2) screws, and six (M2.5x7) screws that secure the base cover to the palmrest and
keyboard assembly [2, 3, 4].
3. Pry the base cover from the top-right corner [1] and continue to open the right side of the base cover [2].
4. Lift the left side of the base cover and remove it off the system [3].
before working inside your computer
Removing and installing components 15