Installing The Speakers - Dell Vostro 3590 Service Manual

Steps
1. Disconnect the speaker cable from the system board [1].
2. Unroute and remove the speaker cable from the routing guides on palm rest and keyboard assembly [2].
3. Lift the speakers, along with the cable, off the palm rest and keyboard assembly [3].

Installing the speakers

About this task
NOTE: If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the
speakers.
Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm rest and keyboard assembly [1].
2. Route the speaker cable through the routing guides on the palm rest and keyboard assembly [2].
3. Connect the speaker cable to the system board [3].
Removing and installing components 43