Installing The Display Cable - Dell Vostro 3590 Service Manual

With optical drive
Hide thumbs Also See for Vostro 3590:
Table of Contents

Advertisement

5. Remove the
battery
6. Remove the
WLAN
7. Remove the
SSD
8. Remove the
hard drive assembly
9. Remove the
system fan
10. Remove the
heatsink
11. Remove the
display assembly
12. Remove the
display bezel
13. Remove the
display panel
14. Remove the
display hinges
Steps
1. Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly [1].
2. Peel the adhesive that secures the camera cable [2].
3. Lift the camera cable and the display cable off the display back-cover and antenna assembly [3].

Installing the display cable

Steps
1. Place the display cable and camera cable on the display back-cover and antenna assembly [1].
2. Affix the adhesive that secures the camera cable [2].
3. Route the display cable and camera cable through the routing guides on the display back-cover and antenna assembly [3].
Removing and installing components
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

P75f

Table of Contents