CYBEX Eagle NX Pulldown Owner's Manual page 16

Install cable
1. Route cable through slot in top cover, through pulley bracket, and down through guide rod plate.
2. Install two BHSCS and two pulley shaft bolts securing lower pulley assembly to pulley bracket using two 5/16"
Allen wrenches.
3. Install two BHSCS and two pulley shaft bolts securing top two pulley assemblies to pulley bracket using two
5/16" Allen wrenches.
4. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight. Install spiral pin
connecting cable assembly to top weight.
5. Verify the cable is moving smoothly.
6. Install back panel.
1
2
3 Lower pulley assembly
4
1
2
3
4
1
2
Page 16 of 25
Description
Pulley shaft bolt
BHSCS
Pulley bracket
Description
Pulley shaft bolt
BHSCS
Top pulley assembly
Pulley bracket
Description
Top weight cover
Spiral pin
Qty
1
1
1
1
Qty
2
2
2
1
Qty
1
1