Miele ProLine CS 1013-1 Operating And Installation Instructions page 47

Connecting the ProLine appliance
 Connect the ProLine appliance(s) to
the electricity supply and to the gas
supply (see "Installation – Electrical
connection" and "Gas connection").
Checking operation
 After installation, ignite all burners to
check that they are operating
correctly:
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
Removing a ProLine appliance
 If the ProLine appliance is accessible
from below, push it upwards to
remove it. Push the back of the
appliance out first.
 If the ProLine appliance is not
accessible from below, take hold of it
with both hands at the back, pull it
forwards, then lift it up and out.
Installation
47