Miele ProLine CS 1013-1 Operating And Installation Instructions page 43

Calculating the worktop cut-out
The frames of the ProLine appliances overlap the worktop at the outside right
and left by 8 mm on each side.
 Add up the widths of the ProLine appliances and subtract 16 mm from this sum.
Example:
288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm
The ProLine appliances are 288 mm, 380 mm or 576 mm wide depending on
model (see "Installation - Building-in dimensions").
Spacer bars
When installing several ProLine appliances, a spacer bar must be fitted in between
the individual appliances. The position for securing the spacer bar will depend on
the width of the ProLine appliance.
Installation
43