Installation; Safety Instructions For Installation - Miele ProLine CS 1013-1 Operating And Installation Instructions

Installation

Safety instructions for installation


Risk of damage from incorrect installation.
Incorrect installation can cause damage to the ProLine appliance.
The ProLine appliance must only be installed by a qualified and competent
person in strict accordance with current national and local safety regulations.

Damage from falling objects.
Take care not to damage the ProLine appliance when fitting wall units or a
rangehood above it.
Fit the wall units and the rangehood before the ProLine appliance.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material.

An electric fryer must not be installed directly next to a gas
cooktop as the gas flames could ignite the fat in the fryer. It is
essential to maintain a distance of at least 288 mm between these
two appliances.

The ProLine appliance must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.

When installing the ProLine appliance, make sure that the gas
hose/pipe and mains connection cable cannot come into contact
with hot appliance parts.

The mains connection cable and any flexible gas connection pipes
must be installed in such a way so that they do not come into
contact with any moving kitchen parts (e.g. a drawer) after the
ProLine appliance has been installed, and that they cannot be
subjected to any mechanical action which could cause damage.

Carefully observe the safety clearances listed on the following
pages.
34