Installation
Installation
Preparing the worktop
Create the worktop cut-out as shown
in "Building-in dimensions" or as
calculated (see "Installation -
Installing several ProLine
appliances"). Remember to maintain
the minimum safety distances (see
"Installation – Safety distances").
Wooden worktops
Seal the cut surfaces of wooden
worktops with a suitable sealant to
avoid swelling caused by moisture.
The sealant must be heat-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
44
Position the spring clamps and
spacer bars at the top edge of the
cut-out in the positions shown in the
illustrations.
Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
wood screws supplied.