DEI dealer; and the unit is returned to DEI, shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number and address;...
Page 4
DEI does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this security system.
FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference re- ceived, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
Transmitter Functions Your vehicle keyless entry system is programmable, making it pos- sible to assign any transmitter button to any specific receiver func- tion. The transmitter initially comes programmed with Standard Configuration, but may also be customized by an authorized deal- er.
Using Your System Arming/Locking Pressing for one second will arm the system and lock the doors. The red LED will begin to flash once per second. The Failsafe® Starter Kill will prevent the vehicle’s starter from crank- ing if it has been installed. If connected, the vehicle's horn will honk and the parking lights will flash once to confirm arming of the system.
Disarming/Unlocking To disarm the system and unlock the doors of the vehicle, press for one second. The Failsafe® Starter Kill will be deactivated and the vehicle’s horn (if connected) will honk twice. The parking lights will also flash twice (if connected). The red LED will go out, unless the system is programmed for passive mode.
Silent Mode Use the Silent Mode to temporarily turn off the arm or disarm con- firmation honks by briefly pressing disarming the system. The confirmation honk(s) will then be elim- inated for that one operation only. To permanently turn off the arm and disarm confirmation honks, contact your installation dealer.
Panic Mode If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter! Just press for 1.5 seconds, and you will enter Panic Mode. The horn will honk and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press NOTE: In order for Panic Mode to function, the vehicle’s horn (or option- al siren) as well as the vehicle's parking lights must be connected.
Programming Options Programming options control what your system does during normal operation, and require little or no additional parts. However, some may require additional installation labor. The following list of program settings shows the defaults in Bold: Passive mode or active mode. In passive mode the Failsafe Starter Kill relay will be automatically activated 30 seconds after the ignition key is turned off.
Owner Recognition Owner Recognition is a feature available exclusively from DEI Using a DEI ® Bitwriter hand-held programming tool, your dealer can program many of the system settings. The programmer makes it possible to program different settings for each transmitter that is used with the system.
Page 16
820T Valet® Car Com™: The 820T is a one-way pager system that can be added to any compatible DEI security system. Using the 820T, many of the security and convenience features of your DEI security system can be operated from any touch tone telephone.
Glossary of Terms Control Unit: The “brain” of your system. Usually hidden under- neath the dash area. It houses the microprocessor which monitors your vehicle and controls all of the alarm’s functions. Failsafe ® Starter Kill: An automatic switch controlled by the secu- rity system that prevents the starter from cranking whenever the system is armed.
QUICK REFERENCE GUIDE: To arm/lock using your remote Pressing for one second will arm the system and lock the doors. The red LED will begin to flash once per second. The Failsafe® Starter Kill will prevent the vehicle’s starter from cranking if it has been in- stalled.
Page 20
Since its inception, DEI® has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, DEI is ISO 9001 registered.