Table of Contents
Advertisement
www.dapumotors.com
Normal View Area
With the display on ,the default display are riding speed、trip 2、PAS
level、battery indicator as show in fig below. Press SET to switch the
display information.
Normal Operation
1. ON/OFF
Hold ON/OFF and start the display. The display will provide power for
the controller. Hold ON/OFF again to open the backlight. With display
on, press ON/OFF for 3 seconds to turn off the power. With the display
off, there is no battery power consumption. The leakage current is no
more than 2 µA.
※ The panel will go to sleep when the speed is 0 km/h for 5 minutes.
2. Current Display
That represents the discharging
current
of
the
controller
currently, each segment is 2A,
six segments is >=12A.
page 6
Address：6101 Long Dong Road,Pudong New Area Shanghai,China
Tel：+86 21 58970723-166
Fax：+86 21 58979066
Advertisement
Table of Contents
