Page 2
WARNING ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. Use with heavier displays may result in instability causing tip over resulting in death or serious injury.
Page 3
Parts (Before beginning, make sure you have all parts shown below). Parts List Description Part # pedestal 146-T1132 column 145-T1131 cover 145-T1809 left adaptor bracket 145-T1609 right adaptor bracket 145-T1608 side support bracket 145-T1807 vertical support bracket 145-T1806 computer cover 145-T1930 computer shelf 145-T1931...
J ( 2 ) H ( 1 ) I ( 1 ) dual cross computer cover computer shelf support M ( 2 ) K ( 4 ) L ( 4 ) cross support cord knob bracket Z (4) M8 x 20mm O ( 68 ) P ( 32 ) Q ( 8 )
Q (4) K (2) L (2) TIGHTEN CONNECTING HARDWARE TOP VIEW 2014-07-28 #:009-9088-4 (2018-03-09)
Page 8
WARNING ENG - When installing Peerless mounts on a concrete floor, the floor must be at least 8" thick with a minimum compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster, drywall, or other finishing material. ADVERTENCIA ESP - Cuando vaya a instalar soportes de techo de Peerless en techos de concreto, los techos tienen que tener, por lo menos, 8"...
Page 9
Drill mounting holes into supporting surface (3" (76mm) minimum depth required). 3/8" Align base. Mark mounting holes. (10mm) 3/8" 3" (10mm) (76mm) 55.00" (1397mm) 3/8" (10mm) Align base. Install using concrete anchors provided. Y (8) ENG Maximum 35 ft • lb (47 N.M.). 55.00"...
Page 10
P (2) Z (2) O (4) N (2) O (4) P (4) 2014-07-28 #:009-9088-4 (2018-03-09)
Page 11
Tighten. Tighten. Cross supports must center on columns. 2014-07-28 #:009-9088-4 (2018-03-09)
Page 12
Tighten. Tighten. Cross supports must center on columns. 2014-07-28 #:009-9088-4 (2018-03-09)
Page 13
O (2) P (2) F (2) P (4) O (4) 2014-07-28 #:009-9088-4 (2018-03-09)
Page 14
Center adapter brackets vertically on back of screen. 2014-07-28 #:009-9088-4 (2018-03-09)
Page 15
"LOCKED" POSITION Must hang displays to bottom row first; Secure pin in "locked" position. "LOCKED" POSITION Must hang displays on top row second; Secure pin in "locked" position. OPTIONAL: Insert M5 x 10mm type-F socket pin screws to lock latches. 2014-07-28 #:009-9088-4 (2018-03-09)
Page 16
Display Adjustment TILT FORWARD SIDE SIDE SIDE TILT BACKWARD TILT RIGHT TILT LEFT SIDE DOWN ROTATE LEFT ROTATE RIGHT 2014-07-28 #:009-9088-4 (2018-03-09)
® This warranty gives specific legal rights, and you may also have other rights which vary from state to state. Peerless-AV Peerless-AV Europe Peerless-AV de Mexico 2300 White Oak Circle Unit 3 Watford Interchange, Ave de las Industrias 413 Aurora, IL 60502...
Need help?
Do you have a question about the DS-S555-3X2 and is the answer not in the manual?
Questions and answers