Table of Contents
Advertisement
IPC1601&2602&5602&5603
User Guide
Step 2 Set the parameters according to Table 8-2.
Table 8-2 PTZ keyboard parameters
Parameter
Enable
Interface Type
Serial Port
Baud Rate
Data Bits
Stop Bits
Parity
Verification
Step 3 Click OK.
The message "Setting PTZ keyboard Updated" is displayed.
Step 4 Click OK.
The system automatically saves the settings.
----End
Issue 12 (2014-06-12)
Description
Select this check box if the device connects
to an external PTZ keyboard.
Interface type used by the external PTZ
board.
The default value is COM1.
Baud rate used by the external PTZ
keyboard. The value ranges from 300 bit/s
to 115200 bit/s. The default value is 4800
bit/s..
The value must match the setting used by
the external PTZ keyboard.
The value must match the setting used by
the external PTZ keyboard.
The value must match the setting used by
the external PTZ keyboard.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 External Device Configuration
Setting
[Default value]
Deselected
[Setting method]
Select a value from
the drop-down list
box.
62
Advertisement
Table of Contents
