Table of Contents
Advertisement
IPC1601&2602&5602&5603
User Guide
Procedure
Step 1 Choose Alarm Configuration > I/O Alarm Linkage.
The I/O Alarm Linkage page is displayed, as shown in Figure 7-2.
Figure 7-2 I/O Alarm Linkage page
Step 2 Select Enable.
Step 3 Configure the I/O alarm schedule.
Figure 7-3 Schedule Time Setting page control
2.
3.
Step 4 Configure the PTZ linkage policy.
Set the Camera ID, Type, and Name parameters.
Issue 12 (2014-06-12)
Click Schedule.
The Schedule Time Setting page control is displayed, as shown in Figure 7-3.
Configure time segments as required.
Click OK.
The system automatically saves the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Alarm Configuration
51
Advertisement
Table of Contents
