Huawei IPC1601 User Manual page 64

IPC1601&2602&5602&5603
User Guide
Step 3 Configure the motion detection schedule.
For details about how to set Schedule, see 7.2 Step 3.
Step 4 Configure the detection area.

1.
Figure 7-5 Motion Area Setting page
2.
3.

Step 5 Configure the PTZ linkage policy.
For details, see 7.2 Step 4 Configure the PTZ linkage policy.
Step 6 Click OK.
The message "Motion Alarm Updated" is displayed.
Step 7 Click OK.
The system automatically saves the settings.
----End
Issue 12 (2014-06-12)
Setting areas within frames as detection areas
Click Motion Area.
The Motion Area Setting page is displayed, as shown in Figure 7-5.
A maximum of eight detection areas can be set.
Click Valid in pointed areas.
Press and hold the left mouse button, and drag in the video area to draw a detection area.
To delete a detection area, right-click the area.
Setting the area out of specified frames as the detection area
For details, see Step 4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Alarm Configuration
54