Huawei IPC1601 User Manual page 29

IPC1601&2602&5602&5603
User Guide
Button
Brush
On/Off IR
Configuring the PTZ
The devices involved in this document do not support the 3D positioning, Timer and the
direction due to the North functions.
If a camera has the PTZ or is connected to a PTZ, you can configure the PTZ in the PTZ
Configure area, as shown in Figure 4-7.
Figure 4-7 PTZ Configure area
In the PTZ Configure area, you can perform the following operations:






Issue 12 (2014-06-12)
Description
Click to clean the lens.
NOTE
This function is available only to a camera with a brush or a camera shield.
Click to turn on or off the camera shields.
NOTE
This function is available only to specific camera shields.
Add, delete, and invoke preset positions.
Add, delete, and invoke tracks.
Adjust the PTZ rotation speed.
Set the timer.
Enable or disable 3D positioning.
The 3D positioning function quickly rotates the PTZ and changes the focal length in
specific scenarios. You can also change the focus by drawing rectangle frames.
Set the direction to due north.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Quick Access
19