Huawei IPC1601 User Manual page 59

IPC1601&2602&5602&5603
User Guide
Table 7-1 Alarm I/O parameters
Parameter
Alarm In
Name
Alarm Level
Alarm Out
Name
Alarm Out
Mode
Issue 12 (2014-06-12)
Description
ID of the alarm input channel.
NOTE
The number of alarm input channels depends
on the device model.
Alarm input channel name.
In alarm configuration web:

If the alarm level is set to Low, the
camera will alarm when the alarm
input terminal signal is the high
level(DC 5V~12V).
 If the alarm level is set to High, the
camera will alarm when the alarm
input terminal signal is the low
level(0V).
ID of the alarm output channel.
NOTE
The number of alarm output channels depends
on the device model.
Alarm output channel name.
When the device receives I/O alarm
signals, the device sends the alarm
information to an external alarm device in
the mode specified by this parameter. The
options include the switch mode and pulse
mode.
NOTE
 If the switch mode is used, the alarm
frequency of the device must be the same
as that of the external alarm device.
If the pulse mode is used, the alarm

frequency of the external alarm device can
be configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Alarm Configuration
Setting
[Setting method]
Select a value from the
drop-down list box.
[Default value]
1
[Setting method]
Enter a value manually.
[Value range]
0 to 32 bytes
[Setting method]
Select a value from the
drop-down list box.
[Default value]
High
[Setting method]
Select a value from the
drop-down list box.
[Default value]
1
[Value range]
0 to 32 bytes
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Switch Mode
49