Huawei IPC1601 User Manual page 33

IPC1601&2602&5602&5603
User Guide
The Stream Config page is displayed, as shown in Figure 5-2.
Figure 5-2 Stream Config page
Step 2 Set the parameters according to Table 5-2.
Table 5-2 Stream configuration parameters
Parameter
Camera Id
Stream Id
Issue 12 (2014-06-12)
Description
ID of the video output channel.
NOTE
An IP camera has only one video output channel.
Therefore, only the default value 1 is available.
The device supports three streams.
 Streams 1 and 2 use the H.264 codec.

Stream 3 uses the Motion Joint Photographic
Experts Group (MJPEG) codec.

The maximum resolution can be set for streams 1
and 3.

Only a low resolution can be set for stream 2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Setting
[Setting method]
Select a value
from the drop-
down list box.
[Default value]
1
[Setting method]
Select a value 1-
3from the drop-
down list box.
23