Table of Contents
Advertisement
IPC1601&2602&5602&5603
User Guide
Configuring and Invoking Preset Positions
You can configure preset positions and quickly rotate the camera to a preset position by
invoking the preset position.
The procedure is as follows:
Step 1 Configure a preset position.
1.
2.
3.
4.
Step 2 Invoke a preset position.
Select a preset position (such as p1) from the Preset drop-down list box to invoke the preset
position whose name is 1.
----End
Configuring and Invoking Tracks
You can record a track to allow the camera to repeatedly rotate based on the preset track.
Step 1 Configure a track.
1.
2.
3.
4.
5.
Step 2 Invoke a track.
Select a track from the Track drop-down list box to invoke the track.
----End
Issue 12 (2014-06-12)
Any direction can be set as the reference due north.
Click Add.
The Add Preset page is displayed.
Set the preset ID and name.
Use arrow keys in the PTZ Control area to set a preset position.
Click Set to finish the preset position setting.
A maximum of 255 preset positions can be configured.
Click Add.
The page for adding a track is displayed.
Set the track ID and name.
Click start to set the starting position of the track .
Use arrow keys in the PTZ Control area to set a required a track
Click End to finish the track setting.
A maximum of six tracks can be configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Quick Access
20
Advertisement
Table of Contents
