Multiple Event Total Recall; False Alarm Control Technology (Fact Ii) - Directed Electronics Concept 550 Owner's Manual

Dei clifford concept 550 car alarms: owners guide

Table of Contents

multiple event total recall

This will report the last eight system triggers.

Press and hold

While still holding

release the button.

The LED will start to blink to indicate the most recent trigger

and proceed down to the eighth trigger. If fewer than eight

triggers are stored in memory, the LED will blink continuous-

ly until the system is armed/disarmed using the transmitter

or the ignition is turned on. For more information, please

refer to the Table of Zones section of this guide.

Your system offers FACT

repetitive trigger sequences due to a faulty sensor or environmental

conditions such as thunder, jackhammers, airport noise, etc.

Here's how it works: The alarm triggers three times. If the same sensor

is triggering the alarm and the first and the third triggers are within 60

minutes of each other, FACT

false alarms. After the third trigger, FACT

sensor (along with any other sensors sharing the same zone) for 60

minutes.

If the bypassed sensor tries to trigger the system while it is being

bypassed, the 60-minute bypass period will start over. This ensures that

a sensor that continually triggers will remain bypassed.

of the PlainView 2 Valet switch.

, arm and disarm the system, then

, a feature that prevents annoying

will interpret this pattern of triggers as

ignores, or bypasses, that

Table of Contents