Multiple Event Total Recall; Battery Back-Up Siren; 2 0 0 5 D I Re C T E D E L E C T Ro N I C S , A L L R I G H T S Re S E R V E D - Directed Electronics 3000 Owner's Manual

n n o o t t e e : : Arming and disarming the system does not reset this function.The
only ways to reset a bypassed zone are for it to not trigger for 60 min-
utes, or to turn on the ignition. If testing your system, it is important to
remember that the NPC
bypassed and appear to stop working. If five chirps are heard when
disarming, NPC
memory, turn the ignition key on.
NPC ® is On/Off programmable. See your dealer and the Programming
section of this guide for more information.

multiple event total recall

This will report the last eight system triggers in reverse chronological
order.
1. Press and hold
2. While still holding
release the
3. The LED will start to flash to indicate the most recent trigger
and proceed down to the eighth trigger. For more informa-
tion, please refer to the Table of Zones section of this guide.

battery back-up siren

The built-in battery back-up siren protects the system if a thief discon-
nects power and/or cuts or tampers with the power supply wires while
the system is armed. If system power is lost the siren will sound for five
minutes and then reset.
© 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d
programming can cause zones to be
®
® has been engaged. If you wish to clear the NPC
of the Valet switch.
, arm and disarm the system, then
button.
®
15