Decimation - Omron STC-MBS202POE Product Specifications And User's Manual

10.12

Decimation

When using Decimation mode, the decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
＜STC-MBS202POE＞
Decimation X (OFF), Y (OFF)
GenICam Parameter
DecimationHorizontal
DecimationVertical
(*1) Decimation cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) Binning and decimation cannot use simultaneously.
(*3) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Decimation.
STC-MBS202POE / STC-MCS202POE
Product Specifications and User's Guide
Decimation X (ON), Y (ON)
IInteger Type Sets decimation on horizontal direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
IInteger Type Sets decimation on vertical direction
Selection: 1: Disable Decimation, 2: Decimate one of two pixels
Default: Disable Decimation
＜STC-MCS202POE＞
Decimation X (OFF), Y (OFF)
No.18S110-02
Decimation X (ON), Y (ON)
49/71