Pixel Format; Binning (Only Stc-Mbs202Poe) - Omron STC-MBS202POE Product Specifications And User's Manual

10.10

Pixel Format

The image format from camera can be set on Pixel Format.
GenICam Parameters
PixelFormat
The following chart shows the available Pixel Formats on camera:
Output Bits
8bits
10bits
10bits Packed
12bits
12bits Packed
8bits x 3
Each format specified on GenICam PFNC (Pixel Format Naming Convention).
10.11

Binning (Only STC-MBS202POE)

Binning is added adjacent pixels into one pixel.
The pixel data inside of red square add or average as one pixel.
Binning X (OFF), Y (OFF)
GenICam Parameter
BinningHorizontal
BinningVertical
(*1) Binning cannot change horizontal only or vertical only. Selection applies for horizontal and vertical.
(*2) Binning and decimation cannot use simultaneously.
(*3) It is necessary to change exposure time (to shorten exposure time), to increase frame rate when using
Binning.
STC-MBS202POE / STC-MCS202POE
Product Specifications and User's Guide
IEnumeration Type Pixel Format
Monochrome Camera
STC-MBS202POE
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
N/A
Binning X (ON), Y (ON)
IInteger Type Sets binning on horizontal direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
IInteger Type Sets binning on vertical direction
Selection: 1: Disable Binning, 2: x2 Binning
Default: Disable Binning
Pixel Format
Color Camera
STC-MCS202POE
Mono8
Mono10
Mono10Packed
Mono12
Mono12Packed
RGB8
No.18S110-02
BayerRG8
BayerRG10
BayerRG10Packed
BayerRG12
BayerRG12Packed
48/71