www.ti.com
12
Troubleshooting ALP Software
12.1 ALP Loads the Incorrect Profile
If ALP opens with the incorrect profile loaded the correct profile can be loaded from the
USB2ANY/Aardvark Setup found under the tools menu.
Highlight the incorrect profile in the Defined ALP Devices list and press the remove button.
Find the correct profile under the Select a Daughter Board list, highlight the profile and press Add.
SNLU241A – December 2018 – Revised April 2019
Submit Documentation Feedback
Figure 13. USB2ANY Setup
Figure 14. Remove Incorrect Profile
Copyright © 2018–2019, Texas Instruments Incorporated
Troubleshooting ALP Software
DS90Ux941AS-Q1EVM User's Guide
19