System Settings; Equaliser; Network; Network Wizard - Configuration Of Internet Connection / Automatic Search - Hama 00054844 Operating Instructions Manual

14. System settings

You can modify all settings and access important
information about the radio in the System settings.

14.1 Equaliser

The equaliser allows you to adjust the sound of the
radio to suit your preferences by amplifying or reducing
the amount of bass or treble in the audio .You can choose
from preconfigured profiles, adjusted to suit a variety of
music Genres, or create your own custom profile.
• To set the Equaliser, proceed as follows:
Press and hold
• Use [ENTER/NAVIGATE] to choose one of the
preconfigured profiles.
• To create your own equaliser profile, choose the option
My EQ profile setup.
• This takes you to the bass, treble and
• loudness settings (volume amplification).
• To adjust a particular value, press [ENTER/NAVIGATE]
at the corresponding menu item and then change the
value by turning [ENTER/NAVIGATE]. If playback is
already started when you modify these settings, you can
hear the changes in the audio immediately.
• Confirm your settings by pressing [ENTER/NAVIGATE]
once more.
• Complete the configuration process by pressing [ ]
on the device and confirm the saving of settings by
pressing [ENTER/NAVIGATE].
• To use the new profile, choose the item My EQ.
[ ]
System settings

Equaliser
16

14.2 Network

14.2.1 Network wizard – Configuration of internet
connection / Automatic search
The network wizard supports you to set up a connection
between the radio and internet. More methods of
configuration and detailed information are amplified
subsequently.
• You can start the Network wizard as follows:
Press and hold
• When the wizard is started, the radio searches for WLAN
(WiFi) connections and then shows a list of the available
networks.
• Turn [ENTER/NAVIGATE] to switch amongst the
networks discovered. At the bottom of the list are
options to restart the search ([Rescan]) or configure the
connection yourself ([Manual config]).
• If your network is not found or the SSID (Service Set
Identification, that is, the name of your network) is not
shown, the network may be hidden or out of range. In
this case, try manual configuration.
[ ]
System settings

Network

Network wizard