System Settings; Standby Screen; Time Settings; Screen Display - Hama 23054296 Manual

SySTeM SeTTInGS

13. System settings
To access the system settings, ensure that the radio is switched on.
Then hold the ON/OFF button down for 5 seconds.
5s

13.1 Standby screen

Select a brightness setting for the display that is to be used in standby mode.

13.2 Time settings

The radio allows the time to be displayed in 12-hour (am/pm) or 24-hour format.

13.3 Screen display

Three different presentations of the display content are supported. Here, you can switch between
naVIGaTe
complete text display, image and text display and full image with subtitles.

13.4 language selection

One of the available system languages can be selected here.

13.5 SW version

The radio's current software version is displayed.
enTeR

13.6 factory settings

This function allows you to reset your radio to the factory settings on the software side. Confirm the
prompt with "yeS" to start the process.
note
Resetting to the factory default settings can remedy some problems and malfunctions.
However, all settings made previously, such as equaliser presets, station presets and network profiles,
will be permanently deleted.
14