Getting Started; Wlan/Wifi Connection (Wireless Network); Radio - Connecting And Starting Up; Initial Setup - Hama 00054844 Operating Instructions Manual

6. Getting started

6.1 WLAN/WiFi connection (wireless network)

• Make sure that the router is on and that you have an
Internet or network connection.
• If it is not already activated, activate the WLAN network
of your router.
• If you have questions about router configuration,
please consult the operating manual of the router for
troubleshooting.
• A detailed description of how to configure the WLAN
connection is given in the Wireless connection section.
6.2 Radio – Connecting and starting up
Connect the network cable to a properly installed and
easily accessible network socket.
The power supply unit is suitable for mains voltages
between 100 and 240 V, and is thus operable on almost
any AC power grid. Please note that a country-specific
adapter may be necessary.
You can find a selection of compatible products at
www.hama.com.
Note
• Connect the product to a socket that has been
approved for the device.
• When using a multi-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
• The electrical socket must always be easily accessible.
• If you will not be using the product for a long period
of time, disconnect it from mains power.
Once the product has been connected to mains power,
initialisation takes place.
The radio starts.
To assist you in first-time setup of the radio, a Setup
Wizard (6.3) is provided.

6.3 Initial setup

When it is first connected to the power supply, a list of
available languages for the menu is displayed. Proceed as
follows to set your preferred language:

6.4 Setup wizard

Once a language has been set, the setup wizard offers to
assist you with first-time setup. Choose YES to start it or
NO to skip.
Note – Starting with or without the setup
wizard
• We recommend using the setup wizard (YES) to
quickly and easily configure the time, date, internet
connection, etc.
• If you wish to skip setup with the setup wizard
anyway, choose NO. All of the settings configured
by the setup wizard can be configured or changed
individually in the System settings menu. Alternatively,
you may restart the setup wizard at any time.
• Next, choose YES or NO to define whether the setup
wizard should start automatically next time the radio
is started up. You are in the main menu.
5
Desired language
(e.g. English)
YES / NO