How To Assemble - Hamilton Beach 38528 Instructions Manual

How to Assemble

Assembly of handle/feet to base is required. See below.
Long Screw (2)
Split Lock Washer (2)
Flat Washer (2)
Tools Required: Phillips-head screwdriver. Do NOT overtighten.
NOTE: Screws and washers may be partially screwed into base for shipping purposes. Remove them to assemble handle/feet to base.
After assembly the handles/feet should feel secure. If the handles/feet are loose, or the unit rocks when on a flat surface, the handles are not
installed properly. Loosen the screws and realign handles; then retighten as shown. Periodically check screws and retighten as necessary.
5