How To Assemble - Hamilton Beach Big Mouth Plus Original Translation

How to Assemble

1
Place strainer bowl on top of the
motor base. Then place the
stainless steel strainer basket
inside the strainer bowl.
5
Place the pulp container into
position by tilting the container
slightly.
840273700 ENv01.indd 7
Strainer Basket
2
With hands on outer edge, press
strainer basket down firmly to
latch into position.
6
Place pitcher with lid under the juice spout. Slide the food pusher
down the feed chute by aligning the groove in the food pusher with
the small ridge on the inside of the top of the feed tube.
BEFORE FIRST USE: After unpacking the juice extractor, remove
cardboard from filter basket and wash everything except the base in
warm, soapy water. Rinse and dry immediately. Never immerse the
base in water or other liquids; wipe it with a damp sponge.
3
Place the juicer cover over the
strainer bowl, positioning the
feed chute over the strainer
basket, and lower into position.
Small Ridge
Inside Feed
Chute
7
4
Raise the locking latches up to
lock into place.
HINT: To minimize cleanup, place
a plastic grocery bag in the pulp
container to collect the pulp. (See
page 8 for more information.)
9/15/2016 3:55:57 PM
7