How To Assemble; How To Use - Hamilton Beach 67806 Manual

How to Assemble

Before first use: After unpacking the juice extractor, wash everything except the base in
warm, soapy water. Rinse and dry immediately. Never immerse the base in water; wipe it with
a damp cloth.
w WARNING
Cut Hazard� The cutter/strainer may fly apart during use if it is damaged,
resulting in the risk of cuts and bruises. To reduce risk of personal injury:
• Never wash cutter/strainer in a dishwasher.
• Always inspect cutter/strainer before each use.
• Never use a cracked, bent, or damaged cutter/strainer.
1� Place Separator on top of Mo"tor Base as
shown in "Parts and Features.
2� Place Cutter/Strainer into Separator and
gently push until firmly in place. Once
in place, the Cutter/Strainer should spin
easily.
3� Place Cover on top of Separator and
Cutter/Strainer.
4� Position the top of both Safety Latches
in place; then push in at bottom to lock.
Lock both sides. DO NOT OPERATE UNIT
UNTIL SAFETY LATCHES ARE LOCKED�

How to Use

w WARNING Laceration Hazard� Never use fingers or utensils other than the food
pusher to press food into food chute. Food should be placed in food chute only
when unit is operating. Food can be continuously placed in food chute without
having to turn off unit.
1� Cut food into pieces to fit the Food Chute.
2� Plug into outlet.
3� Be sure a juice container and the Pulp Bin
are in place.
4� Push switch up to turn ON (I). The unit will
not turn on until Safety Latches have been
locked.
5� Place food in Food Chute and press down
gently and slowly with Separator.
6� When Pulp Bin is full, turn unit OFF ( ).
It is very important to empty the Pulp Bin
Important Information
• The Juice Extractor is manufactured
for NORMAL HOUSEHOLD USE. If
you have large quantities, such as
10 pounds or more, process in small
batches, allowing motor to cool
completely between uses.
• DO NOT OVERLOAD THE Food
Chute. For best results, simply drop
food pieces, one at a time, into Food
5� Put Pulp Bin in place. Slide top in first,
then bottom, and snap into place.
6� Place a container in position under Juice
Spout.
NOTE: Check the Pulp Bin frequently.
It is important to empty the Pulp Bin
when full and to clean out the Separator.
7� To disassemble: Unplug cord from outlet.
Unlock both Safety Latches by pulling out
tops of latches. Remove Cover; then lift
up Separator with Cutter/Strainer.
when full. For best performance, empty
Pulp Bin and clean Cutter/Strainer and
Separator often.
7� When juicing is completed, or when Pulp
Bin or juice container need to be emptied,
turn unit OFF ( ) and unplug from
outlet. Immediately wash Cutter/Strainer
according to instructions.
8� For more information, see "Juicing Tips
and Techniques."
Chute. Gently and slowly press down
with Food Pusher. This will extract the
maximum amount of juice.
• If the Juice Extractor SEEMS TO
STRUGGLE or slow down, turn the
unit OFF ( ) and unplug. Thoroughly
wash the Cutter/Strainer and
Separator according to instructions.
Reassemble and continue juicing.
| 5
ENGLISH