Parts And Features; How To Assemble - Hamilton Beach Big Mouth Plus Operation Manual - Original Instructions

Parts and Features

Model: 67750G-SAU
Type: CJ19
Food Pusher
Ratings:
220–240 V~ 50–60 Hz 600 W
Extra-Wide Feed Chute
Stainless Steel
Micro-Mesh Strainer
Basket*
O OFF
LOW
I
II HIGH
Large Pulp
Container
6
⚠ WARNING
Laceration Hazard.
Micro-mesh strainer basket may fly apart during
use if it is damaged, resulting in the risk of cuts and
bruises. To reduce the risk of personal injury:
• Always inspect micro-mesh strainer basket before
each use.
• Never use a cracked, bent, or damaged micro-
mesh strainer basket.
Cleaning Brush
Strainer Bowl
Juice Spout
Locking Latch
Pitcher Lid
Pitcher
Switch
Motor Base

How to Assemble

Strainer Basket
1 2
Place strainer bowl on top of the With hands on outer edge, press
motor base. Then place the strainer basket down firmly to
stainless steel strainer basket latch into position.
inside the strainer bowl.
5 6
Place the pulp container into Place pitcher with lid under the juice spout. Slide the food pusher
position by tilting the container down the feed chute by aligning the groove in the food pusher with
slightly. the small ridge on the inside of the top of the feed tube.
BEFORE FIRST USE: After unpacking the juice extractor, remove
cardboard from filter basket and wash everything except the base in
warm, soapy water. Rinse and dry immediately. Never immerse the base
in water or other liquids; wipe it with a damp sponge.
3 4
Place the juicer cover over the Raise the locking latches up to
strainer bowl, positioning the lock into place.
feed chute over the strainer
basket, and lower into position.
Small Ridge
Inside Feed
Chute
HINT: To minimize cleanup, place
a plastic grocery bag in the pulp
container to collect the pulp. (See
7
page 8 for more information.)
7