Extended Usb Headers (Jp6/Jp7); Front-Panel Microphone And Line_Out Header (Jp11) - Shuttle FB52 Manual

Extended USB Header (JP6/JP7)
C5
The headers are used to connect the cable attached to USB connectors
which are mounted on front panel or back panel. But the USB cable is
optional at the time of purchase.
USB port 2
1
3
5
7
9
Pins Assignment:
1=+5V
4=USBD1-
7=GND
10=N/A

Front-Panel Microphone and Line_out Header (JP11)

C6
This header allows users to install auxiliary front-oriented microphone and line-
out ports for easier access. Either the Mic and Line_out connector on back-
panel or JP11 header are available. If you would like to use this JP11 header on
front-panel, please remove all jumpers from JP11 and install your special Extra
Mic/Line_out cable instead.
10
8
6
4
2
Pins Assignment:
1=AUD_MIC
3=AUD_MIC_VCC
5=AUD_FRONT_R
7=HP_ON
9=AUD_FRONT_L
USB port 3
10
2
9
8
4
7
6
6
5
4
8
3
2
10 1
2=+5V 3=USBD0-
5=USBD0+ 6=USBD1+
8=GND 9=KEY
9
Two mini jumpers must
7
be setted on pin5-6 and
5
pin9-10, when this
3
header is not used.
1
2=AUD_GND
4=AUD_RESERVE
6=AUD_RET_R
8=KEY
10=AUD_RET_L
- 33 -
USB
1
1
JP7
JP6
Line-Out/MIC
1
JP11