To Connect The Alarm Output; To Connect The Space Cooling/Heating On/Off Output; To Connect The Changeover To External Heat Source; To Connect The Power Consumption Digital Inputs - Daikin Altherma EABH16DA6V Installation Manual

4 Installation
4.4.8

To connect the alarm output

1 Connect the alarm output cable to the appropriate terminals as
shown in the illustration below.
7 9
X2M
X1M
X5M
A4P
YC Y1 X1M
YC Y1 Y2 Y3 Y4
a Installation of EKRP1HB is required.
2 Fix the cable with cable ties to the cable tie mountings.
4.4.9 To connect the space cooling/heating ON/
OFF output
1 Connect the space cooling/heating ON/OFF output cable to the
appropriate terminals as shown in the illustration below.
7 9
X2M
X1M
X5M
A4P
YC Y2
X1M
YC Y1 Y2 Y3 Y4
a Installation of EKRP1HB is required.
2 Fix the cable with cable ties to the cable tie mountings.
4.4.10 To connect the changeover to external
heat source
1 Connect the changeover to external heat source cable to the
appropriate terminals as shown in the illustration below.
Installation manual
12
a
2 Fix the cable with cable ties to the cable tie mountings.
4.4.11
1 Connect the power consumption digital inputs cable to the
2 Fix the cable with cable ties to the cable tie mountings.
4.4.12
1 Connect the safety thermostat (normal closed) cable to the
a
2 Fix the cable with cable ties to the cable tie mountings.
X2M
X1M
X5M
A4P
X1M
YC Y1 Y2 Y3 Y4
L N
a Installation of EKRP1HB is required.
To connect the power consumption digital
inputs
appropriate terminals as shown in the illustration below.
X5M
A8P
1 2 3 4 5
a Installation of EKRP1AHTA is required.
To connect the safety thermostat (normal
closed contact)
appropriate terminals as shown in the illustration below.
X5M
Daikin Altherma – Low temperature split
a
a
X801M
EABH/X16DA+9W
4P556066-1 – 2018.10