Safety; Safety Devices On The Appliance; Safety Instructions For Installation - Bellfires Box Gas Panorama 73/52 MF Installation And Maintenance Manual

Table of Contents

Advertisement

3 3

Safety

3.1

Safety devices on the appliance

Name
Thermo-electric pilot light shut off
Overpressure door (= glass front) and
overpressure hatch
3.2

Safety instructions for installation

Box Gas Panorama 73/52
Warning:
The appliance must be positioned and connected as a 'room sealed
system' appliance by a certified and registered gas installation engineer
Before beginning the installation, check that the details on the rating plate
correspond to the gas type and supply pressure to which the appliance will
be connected.
Install the appliance in accordance with the following installation
instructions, and the national and the local applicable regulations.
Because of its weight, the appliance needs to be installed on a sufficiently
strong and stable floor. Refer to chapter
Do not put flammable materials in the fireplace.
Make sure that the area around the fireplace is free of flammable materials
at all times. Refer to chapter
Do not install the appliance against a flammable rear wall. Refer to chapter
3.3
for minimum clearances between the appliance and the wall.
Make sure that the burner openings stay clean during installation.
Blockage of the burner openings can lead to a dangerous situation.
Make sure that the gas regulator block and the piping remain free of
cement or other building material. Otherwise, the gas regulator block or the
piping can start to leak.
Do not twist the flexible pipes to the gas regulator block. Make sure that
there is no stress on the flexible pipes and the gas regulator block.
Make sure that you do not damage the pipes.
Make sure that the compression fittings do not come loose.
After installation, Make sure that the pipes and compression fittings are
gas tight.
Caution:
Only use the items that are supplied or described in the preparation
manual and other related documentation.
Do not use masking tape on the appliance. Masking tape can damage the
finish of the appliance.
Description
Prevents unforseen discharge of gas from the main
burner.
If an overpressure occurs in the appliance, the glass
front door and the hatch opens for a short duration.
When the door and hatch opens, a loud noise can oc-
cur. If an overpressure occurs, the installer must do a
thorough check on the appliance.
7
for the weight of the appliance.
3.3
for the minimum safe distances.
Safety
17

Advertisement

Table of Contents
loading

Table of Contents