Download Print this page
SmoothTalker MOBILE M2M User Manual

SmoothTalker MOBILE M2M User Manual

Advertisement

Quick Links

MOBILE M2M
User Manual
Warranty:
3 Year on manufacturing defects. Does not include misuse or customer damage.
Original Bill of Sale is required for all Warranty Claims
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and
have your provider's consent. Most wireless providers consent to the use of signal
boosters. Some providers may not consent to the use of this device on their network. If
you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the FCC or a
licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for
calls served by using this device.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MOBILE M2M and is the answer not in the manual?

Questions and answers

Summary of Contents for SmoothTalker MOBILE M2M

  • Page 1 MOBILE M2M User Manual Warranty: 3 Year on manufacturing defects. Does not include misuse or customer damage. Original Bill of Sale is required for all Warranty Claims This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent.
  • Page 2 To comply with FCC rules, this booster must only be operated with cables, antennas and coupling devices that have been approved for use with this equipment For specifications of any of the Smoothalker FCC approved part numbers listed below visit smoothtalker.com APPROVED EQUIPMENT LIST...
  • Page 3 1) Installation & Assembly: Connect the cellular devise, the outside antenna and power supply to the booster. Please make sure to connect each item to the correct ports as indicated on the booster. 2) Placement Connect the booster as shown in Fig. 1 and Fig. 2 Important: Use only the power supply included with the booster.
  • Page 4 This condition will change as the booster approaches or leaves a cellular tower. NOTE: It is normal for the booster to be quite warm while the phone is in use state. TECH SUPPORT: www.smoothtalker.com...