Mounting The Rack Adapter Brackets - RME Audio M-32 AD Pro User Manual

High-end converter, 32-channel 192 khz a/d converter with madi & avb i/o

Hide thumbs Also See for M-32 AD Pro:

Table of Contents

When connecting the M-32 AD Pro with a standard ("printer") USB 2.0 cable to a current

Microsoft Windows™ or Apple macOS™ operating system, a network adapter will be automatically

installed. This does not require additional drivers. The device can then be remotely controlled by

opening the URL http://172.20.0.1.



The USB port cannot be used to stream audio signals.

3.18. Mounting the Rack Adapter Brackets

When the device should be mounted in a 19" rack, the rack adapter brackets must be mounted first.

Mount each bracket with two screws using a Philips PH-1 screwdriver.



Do not use screws other than the ones included. Using longer screws may result in the

internal damage of the device!



Never insert the screws without the rack adapter bracket. This can damage of the

device!

RME M-32 AD Pro User's Guide

3.18. Mounting the Rack Adapter Brackets | 14

Table of Contents