Table of Contents
Advertisement
Categories
Food
Pork
Beef
Meat
Lamb
Meat dishes
Fish
Fish
Fish fillets
Vegetables
Potatoes
Side dishes, vegeta-
bles
Rice
Cereals
Vegetables
Menu
Reheat, crisp up
Baked goods
Side dishes
Bread, bread rolls
Cake
Defrosting food
Meat, poultry
Fish
Baking sensor
Your appliance is equipped with a baking sensor.This
sensor is automatically activated when you select a
baked item from any of the following categories in the
selection list. If the baking sensor has been activated,
the
symbol appears on the display.
H
Category
Food
Cake
Cake, bread, pizza
Small baked
items
Savoury cakes,
pizza, quiche
The appliance now takes over.The appliance then
regulates the baking process completely automatically
– you do not need to implement any further settings.
Once the food is cooked, the appliance will switch itself
off automatically. An audible signal will then sound. The
cooking time is roughly the same as that listed in the
recipe for your baked item and is not displayed. The
oven sensor can only be started from the oven when it
is cool.
No other baked goods categories are monitored by the
baking sensor. In this case, you will be offered a tried
and tested setting with customisation options.
Dark-coloured metal baking tins are suitable. Do not
use any silicone bakeware or accessories that contain
silicone. Otherwise, the baking sensor will be damaged.
Dishes
Cakes in deep tins
Cakes in shallow tins
Cakes on a tray
Puff pastry
Scones
Muffins
Leavened cake
Savoury cakes, quiche
Pizza
The baking sensor is active while "Do not open door" is
shown on the display. Do not open the appliance door;
otherwise, the settings will be cancelled. The appliance
asks you whether you wish to continue cooking. The
appliance will continue to heat and you can adjust the
suggested time. You must monitor the process yourself.
Applying settings for dishes
You will be guided through the entire setting process for
your chosen food. Always touch the "Next" field.
Press the menu button.
1.
The operating modes menu will open.
Select "Dishes" mode.
2.
The first category will appear on the display.
Use the rotary selector to select the category you
3.
require.
Touch the "Next" field.
4.
Use the rotary selector to select the food.
5.
Touch the "Next" field.
6.
Use the rotary selector to select the dish.
7.
Touch the "Next" field.
8.
Turn the rotary selector to set the weight.
9.
Touch the "Tip" field for information on the
Note:
best shelf position, cookware, etc. to use.
Press the Start/Stop button to start.
10.
Once you have implemented all the settings, start the
appliance by pressing the Start/Stop button.
For settings that use steam, the appliance only starts
after it has heated up.
The setting has ended
A signal sounds. "Finished" appears in the status bar.
The oven stops heating. You can cancel the audible
signal early using the
0
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested.
However, you can change this if you want.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears in the display.
Cancelling the setting
Press the On/Off button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
You can find out how to set a later end time by looking
in the time-setting options. ~ "Time-setting options"
on page 18
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to end. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.
Dishes
button.
en
39
Advertisement
Table of Contents
