Setting The Microwave; Dry - Siemens HN878G4.6B Instruction Manual

Hide thumbs Also See for HN878G4.6B:
Table of Contents

Advertisement

Microwave
en
Press the menu button.
1.
The operating modes menu opens.
Select the "Microwave combination" operating mode.
2.
A type of heating, temperature, microwave output
setting and cooking time are suggested.
Touch the appropriate field and use the rotary
3.
selector to set the required values.
Press the Start/Stop button to start.
4.
The cooking time starts counting down.
You can change the values. Pause the oven by
pressing the Start/Stop button. Touch the appropriate
microwave field and use the rotary selector to change
the cooking time. Press the Start/Stop button to restart.
The cooking time has elapsed
An audible signal sounds. The cooking compartment
stops heating.
0 min 00 s appears on the display
x
and "Finished" appears in the status bar. You can
cancel the audible signal before it has finished by
pressing the
button.
0
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door: The operation continues.
Cancelling the operation
Press the On/Off button.

Setting the microwave

To achieve optimum results with the microwave, always
insert the wire rack at shelf position 2.
Press the menu button.
1.
The operating modes menu opens.
Select the "Microwave" operating mode.
2.
Microwave output settings and a cooking time are
suggested.
Touch the required microwave output setting to
3.
select it.
Touch the "Cooking time" field and set the cooking
4.
time using the rotary selector.
Start the microwave using the Start/Stop button.
5.
The cooking time starts counting down.
You can change the microwave output setting.Pause
the oven by pressing the Start/Stop button.Touch the
appropriate microwave field. Press the Start/Stop
button to restart.
You can change the cooking time at any time while the
operation is running.
To prevent condensation from forming when the
appliance is in microwave only mode, the appliance will
automatically switch on an additional heating element
when it is set to 600 W or "Max.". The cooking
compartment and the accessories will become hot. The
cooking result is not affected by this.
You can switch this function off in the basic
Note:
settings. ~ "Basic settings" on page 20
22
:
Warning – Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an additional
heating element to heat the cooking compartment.
Never touch the inside surfaces of the cooking
compartment or the heating elements while they are
hot. Keep children at a safe distance.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
0 min 00 s appears in the display end "Finished"
x
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the
If you want to set a microwave output setting again,
touch the appropriate field and enter a cooking time.
The operation starts again.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door, press the start/stop button. The
operation continues.
If you have altered the basic setting, make sure
Note:
that the microwave does not resume operation without
food inside. ~ Page 20
:
Warning – Risk of burns!
The accessible parts become very hot when in
operation. Never touch hot parts. Keep children at a
safe distance.
Cancelling the operation
Press the On/Off button.

Dry

With the "Dry" operating mode, the cooking
compartment is heated up and the moisture in the
cooking compartment evaporates. Use the drying
function after every microwave operation.
Press the menu button.
1.
The operating modes menu opens.
Select the "Dry" operating mode.
2.
Press the Start/Stop button to start.
3.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door for 1 to 2 minutes so that the
moisture can escape.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
Drying the cooking compartment by hand
Allow the appliance to cool down.
1.
Remove any food remnants from the walls of the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
button.
0

Advertisement

Table of Contents
loading

Table of Contents