Unpermitted Operation; Transport And Storage; Intended Use - WITA go.future LED 40-XX Operating Instructions Manual

Operating Instrutions

2.9 Unpermitted operation

If the pump is disconnected from the power supply, wait at
least 1 minute before reactivating. Otherwise, the pump's
inrush current limit has no effect, which can lead to functional
errors or damage to any connected heating controller.
The pump's operational safety can only be ensured
if it is used as intended. Please observe section 4 of
these operating instructions here.
Ensure compliance with the limit values detailed
in the technical data.

3 Transport and Storage

After receiving the product, inspect it immediately for damage caused in transport.
Should you detect any transport damage, assert a claim with the haulier.
Incorrect transport and storage can lead to personal injury or damage to the product.
• Protect the product against frost, moisture and
damage during transport and storage.
• Only carry the pump by the pump housing,
and never by the connection cable or terminal box.
• If the packaging weakens due to moisture, this can
lead to the pump falling out and causing severe injury

4 Intended Use

The WITA go.future LED 40-XX / 60-XX high-efficiency pumps are designed for circula-
ting hot water in central heating systems, and are also suitable for conveying thin liquid
media in indudustrie and commerce. They can also be used in photovoltaic systems.
26
WITA go.future LED 40-XX | 60-XX