F1.3 Ethernet WAN Interface
The NexusLink 3120 supports a single Ethernet WAN interface over the ETH WAN
port. Follow these procedures to configure an Ethernet interface.
STEP 1: Go to Basic Setup
from the drop-down menu.
This table is provided here for ease of reference.
Heading
Description
Interface/ (Name)
WAN interface name.
Connection Mode
Default Mode – Single service over one interface.
Vlan Mux Mode – Multiple Vlan services over one interface.
Remove
Select interfaces to remove.
STEP 2: Click Add to proceed to the next screen.
WAN Setup Select ETHERNET Interface
177