Comtrend Corporation NexusLink 3120 User Manual page 116

Option Description
A checkbox  that enables or disables the wireless LAN interface.
Enable
Wireless When selected, a set of basic wireless options will appear.
Hide Select Hide Access Point to protect the access point from detection by
Access wireless active scans. To view and connect to available wireless
Point networks in Windows, open Connect to a Network by clicking the
network icon (
hidden, it will not be listed there. To connect a client to a hidden access
point, the station must add the access point manually to its wireless
configuration.
Clients When enabled, it prevents client PCs from seeing one another in My
Isolation Network Places or Network Neighborhood. Also, prevents one wireless
client communicating with another wireless client.
Disable Stops the router from 'advertising' its Wireless Multimedia (WMM)
WMM functionality, which provides basic quality of service for time-sensitive
Advertise applications (e.g. VoIP, Video).
Enable Select the checkbox  to enable this function.
Wireless
Multicast
Forwarding
Enable Select the checkbox  to enable the WiFi button.
WiFi
Button
SSID Sets the wireless network name. SSID stands for Service Set
Identifier. All stations must be configured with the correct SSID to
[1-32 access the WLAN. If the SSID does not match, that user will not be
characters] granted access.
BSSID The BSSID is a 48-bit identity used to identify a particular BSS (Basic
Service Set) within an area. In Infrastructure BSS networks, the
BSSID is the MAC (Media Access Control) address of the AP (Access
Point); and in Independent BSS or ad hoc networks, the BSSID is
generated randomly.
Country A drop-down menu that permits worldwide and specific national
settings. Local regulations limit channel range:
US= worldwide, Japan=1-14, Jordan= 10-13, Israel= 1-13
Country Wireless country code for transmit power limit.
RegRev
Max Clients The maximum number of clients that can access the router.
Wireless - This router supports multiple SSIDs called Guest SSIDs or Virtual
Guest / Access Points. To enable one or more Guest SSIDs select the
Virtual checkboxes  in the Enabled column. To hide a Guest SSID, select its
Access checkbox  in the Hidden column.
Points
Do the same for Isolate Clients and Disable WMM Advertise. For
a description of these two functions, see the previous entries for
"Clients Isolation" and "Disable WMM Advertise". Similarly, for Enable
WMF, Max Clients and BSSID, consult the matching entries in this
table.
NOTE: Remote wireless hosts cannot scan Guest SSIDs.
or ) in the notification area. If the access point is
115