Encapsulation Method; Modulation Method; Unpacking - D-Link DSL-200 User Manual

Encapsulation Method

It may be necessary to use an encapsulation method that is different from the default
method. The protocol used for your connection, and thus the driver you use will
determine which encapsulation method is used. If your DSL service provider does not
specify which method to use. Use the default encapsulation method.

Modulation Method

It may also be necessary to use a modulation method that is different from the default
method. If your DSL service provider does not specify which method to use. Use the
default modulation method.
Additional Information
WAN Driver Users If you are using the WAN driver, you must supply user account
information (user name and password) to make the final network connection.
LAN Driver Users If you are using the LAN driver, you may be required to manually
configure your IP settings. Your DSL service provider will tell you if you need to
configure your PCs IP settings.

Unpacking

Open the shipping carton and carefully remove all items. In addition to this User's
Guide, make sure that you have:
DSL-200
1. Modem
1. D-Link DSL-200 USB Modem
2. USB cable
3. ADSL cable or connector
4. Installation CD-ROM
7
USB
2. USB Cable 3. ADSL Cable 4. Installation CD