Modem Description And Operation; Product Features - D-Link DSL-200 User Manual

Modem Description and Operation

The DSL-200 ADSL USB Modem is easy to install and use. Please note that you must
first install the software driver for the device by following the instructions in Chapter 3.
Once the driver has been installed, you can connect the Modem to your computer. The
Modem connects directly to any functional USB port on a PC with a standard USB
cable.
Software drivers for D-Link ADSL USB Modems can be fully upgraded by simply
loading the latest version onto your PC. This will allow you to update the modem and
use new features and enhancements as they are developed and standardized. Online
information regarding the latest downloadable software and improvements can be
found at http://support.dlink.com.

Product Features

The D-Link DSL-200 Modem provides the following features:
G.hs compliant (Auto-handshake)
G.dmt full rate compliant
G.lite compliant
RFC 1483 (Bridged Ethernet) compliant
RFC 2364 PPP over ATM compliant
Compatible with all RFC 2516 PPP over Ethernet compliant equipment
Compatible with all T1.413 issue 2 (full rate DMT over analog POTS), and CO DSLAM
equipment
Compliant with USB Specification Revision 1.1
USB interface to PC host
Plug and Play installation
Easy to upgrade software
GUI based configuration and diagnostic tool
Supports up to sixteen simultaneous ATM virtual connections
10