Install The Software Driver; Install The Driver - D-Link DSL-200 User Manual

Install the Software Driver

You can install the software driver on a PC running either the Windows 98, Windows
98 Second Edition, Windows 2000 or Windows Millennium Edition operating system.
You have a choice of two different drivers, the LAN (Local Area Network) or WAN
(Wide Area Network) driver. The instructions in this chapter can be used for either the
LAN or WAN driver, the installation procedure is identical for both. If you are not sure
which driver you should install, see the previous section What Driver to Install, for more
information.

Install the Driver

Before starting the software setup process, exit all Windows applications currently
opened on your PC. The software driver installation procedure is identical for Windows
98/98SE, Windows Me and Windows 2000.
DO NOT CONNECT THE USB CABLE. You must install the software driver before
you connect the device to your computer via the USB cable. You will be prompted to
connect the device during the installation. Connecting the USB cable at this point will
initiate the Found New Hardware process.
To install the software driver for the Modem, follow these steps:
1. Insert the DSL-200 Installation CD into the CD-ROM drive. Double-click on the
My Computer icon located on your desktop. Double-click on the CD-ROM icon.
2. Double-click Setup.exe to start the installation procedure. A notification
message will appear indicating that the setup process has begun.
3. The Welcome window recommends that you exit all other programs before you
run the Setup program. Make sure you exit all other applications and click Next.
14