BT Diverse 2000 User Manual page 40

are available from the Diverse Helpline on
0345 908070
BT accepts no responsibility for damage
caused to your Diverse 2000 Additional
Handset by the use of unsuitable batteries.
No display appears
Is the handset switched on?
The battery may be flat or dead.
Recharge or replace the battery.
No dial tone
Is the telephone line cord plugged into
the phone socket and the base station?
If other handsets are registered on the
base, the outside line may already be in
use. Wait until the call is finished and
try again.
Is your handset registered with the base?
See section on Registering your handset.
Is your handset out of range? Move back
within range of the base station.
Can't make an external call, even
though a dialling tone can be heard
You may be set to the wrong signalling
method. To change between TONE and
PULSE dialling refer to your base station
user guide.
The
display or you can not link up with the
base station
Is the handset registered with the base
station? To register the handset, see
page 13.
Is the power cable connected at the base
and power switched on at the wall socket?
38
or your local BT shop.
symbol is flashing on the