BT Diverse 2000 User Manual page 16

To register your new handset
The handset must be switched OFF.
At the base station:
• Press and hold down the
button until you hear beep (after about
10 seconds).
You now have up to 1 minute to register
the handset, during this period the beeps
will continue.
At the handset:
1
• Press and hold down the
together with the
the display shows 1–. This tells the
base station that its base number is
• Enter the 4 digit system code.
(Standard setting 0000.)
• Press the
after about 10 seconds, and the
display shows all the available handset
numbers.
• Select and enter one of the available
numbers. This is now the handset's
internal number and the handset is
now registered with the base station.
If you experience any problems
registering your handset using these
instructions, please refer to your base
station user guide. If you still
experience difficulties, please phone
the Diverse Helpline on 0345 908070
for assistance.
14
#
#
button. The beeps stop
GREY
1
button, until
PWR
paging
button
1
.