BT Diverse 2000 User Manual page 19

PROTECTED
This setting stops you accidentally
operating the handset's keypad when
carrying it around. You can still receive
incoming calls but you can not make
calls.
PWR
• To switch to PROTECTED when the
handset is ON, press and release the
PWR button quickly, your display will
show — — — — — — , and your keypad is now
protected. To remove protection,
press and release
The symbol will f lash if the handset
is out of range or is not registered with
a base station. If you wish you can set
the handset to beep as well as f lash.
To set the handset to give you an out
of range warning, please refer to your
Diverse base station user guide.
The symbol may also f lash after
a power failure. Provided the handset
has been registered with the base,
the symbol will stop f lashing after
a while, indicating the handset has
automatically re-registered to the base
station. If it continues to f lash, re-
register the handset to the base station.
Getting the most out of your
batteries
Avoid replacing the handset on the
base station between calls. It is best to
keep the handset off the base for a few
hours at a time.
button again.
PWR
17